Table of Contents
Advertisement
STATION
ATTRIBUTES
PROGIWHMXG
@mite
4096
Hybrid Key
Telephone
System
STATION
PROGRAMMIN
G (Cont'd)
H.
Least Cost Routing
- Forced
pr0g
' f Steps
1. Press the FWR
flexible
button
lpage A,
Button
#8).
l
LED on = Least Cost Rout&@ is forced
l
LED off= Least Cost Routing
is optlonal
2. Press the HOLD button
to enter data
I.
LCR Class of Service
Programming
Steps
1. Press the LCOS flexible
button
(Page A.
Button
#9).
2. Enter
a one-digit
number
between
0 and
6 to correspond
to the LCR Class of Service
desired.
3. Press the HOLD button
to enter data
J.
Conference Enable/Disable (per Sta-
tion)
Programming
Steps
1. Press the CONF flexible
button
(Page A,
Button
#13).
l
LED on = Conference
is enabled
l
LED off = Conference
is disabled
2. Press HOLD
button.
Display
will now up-
date.
Description
FLCR. Stations may be forced to place outgoing
CO calls by use of LCR (d&i [9]) to access an
outside
line). This allows the system
admix-
trator
to control
dialing patterns
and the lines
used for outgoing
CO calls more
effectively.
This can be enabled/disabled
on a per station
basis for additional
flextbiltty
and control.
Default:
LCR is
optional
for aJl stattons.
Related Programming:
LCR Class of Servfce
(below).
LCR Enable/Disable
(Sec. 710.22).
and LCR progmmming
(Sec. 755).
Description
LCOS. Stations
can
be given a class of service
assignment
for Least Cost Routing.
The range
is between
0 and 6 with 0 being unrestricted
and 6 being the most restricted.
A station
will
be allowed
use of LCR routes
with
a priority
number
equal to or higher
than
the stations
LCR COS assignment.
Default: By
default,
all
stations
an
given un-
restricted
access (0).
Related Programming .
LCR Route
List Table
pr0gr-g.
DescrlpUon
CONF. This feature
allows
the system
to be
programmed
on a per Station
basis
for the
ability to initiate
a conference.
Only stations
that
have Conference
enabled
will be able to i.nlUate a conference.
When attempting
to establish
a multi-line
con-
ference, the CO line must also have conference
capabilities
A station
that is denied conferencing
capabili-
ties in
pro@amming
can be a party to another
stations
conference
provided
that station
does
have conferencing
privileges.
Default:
By default.
Conference
is enabled
for
all stauons.
Related
Programming:
CO Line
Attributes
programming
for Conference
capabilities.
7304
Issue 1. January 1992
Advertisement
Table of Contents
