Vodavi Infinite 4096 Installation And Maintenance Manual page 201

Exception Tables Programming (Cont'd)
D. Special Table Programmfng
PrQg
' g Steps
To program a special table it is !Irst necessary
to assign an area code to the table (except for
the home area code).
1. To assign an area code to a speclal table
press the appropriate AREA X flexible but-
ton (button #9- 11). The following display
will be shown on the display phone:
2. Enter the three (3) digit area code.
3. Press the HOLD button. The display will
now update.
4. To enter office codes into the special table
press the ST-X flexible button (button #5
- #8) that corresponds to the area code
programmed above. The following display
will be shown on the display phone:
Where:
XXX= AreaCode
5. Enter the three (3) digit of&e codes that
are to be allowed followed by a [l] which
means to allow this code. To remove a
code from the allow list enter the three (3)
digit office code followed by a [0] which will
remove the code
fmm the allow list.
x)Ix [1] = Allow code
,XICC [O] = Remove code from the list
Where Xxx = an office code from 200 to 999.
6. Press enter after every code entered. Mul-
tiple codes may be entered in a row. The
display will update showing the first six
codes in ascending order.
Description
The special tables provide greater flexibility ln
designing a toll plan for a particular site. Each
special table allows entry of up to 800 three
digit ofike codes (200 - 999). Three of these
table-s must be assigned an area code by which
they are referenced. the fourth table is re-
served for the home area code and requires no
area code en&y.
The special tables are referenced through en-
Mes in the allow tables. Four area codes,
including the home area code, can be refer-
enced to these special tables for further defini-
tion.
When a special table is referenced,
entries must be made in the special table speci-
fying what oflIce codes will be allowed. By
default no codes are on the allow list.
Codes can be added to the allow list or removed
from the list. When a special table is checked
for a match, to a three digit code, but not found
the system will then continue to search the
next allow deny table that is to be checked. The
system does not return to the allow table which
routed the call to the special table.
750-S
Issue 1, January 1992