Table of Contents
Advertisement
Imite
4096
Hybrid
Xey Telephone
SYStem
FEATURE
OPERATION
3.
Dial the speed bin number
that contains
the number
where
calls are to be for-
warded
or press the programmed
button
for the speed bin. Confirmation
tone is
heard.
Canceling
Off-Net
Forwarding
1. Dial [296] on the d.ial pad.
2. Dial the CO group
access code.
3. Dial [#I. Confirmation
tone is heard
400.16
CAUJNG
STATION
TONE MODE
OPTION
AlIows
a calling
station
to override
a called
statlons
H or P intercom
switch settings.
When
placing
a call to a station
and Tone
ringing
is desired:
a. Dial [5#] on the dial pad.
b. Dial
3-dQit
station
extension
or press
DSS button
of desired station
Call tone
rings station.
400.16
CAL&PARK
To place an outside
call on hold and consult
with,
page, or call an internal
party
and/or
transfer
the outside
call.
While connected
to an outside
line:
a. Press TRANS button.
The caller is put on
Exclusive
hold.
b. Dial parking
location
(790 to 795). Hear
confirmation
tone.
c. If you hear busy tone, press TRANS and
dial another
parking
location.
FWriedng
a Parked CaJl
a Lift handset
or press ON/OFF
button.
b. Dial pound
[#I.
c. Dial parking
location
(790 to 795) where
the calI was parked.
400.17
CALL PICX-UP:
GROUP
When intercom
tone ringing,
transferred
out-
side line ringing,
or recall ringing
is heard at
an unattended
telephone:
a. Lift the handset
or press the ON/OFF
button.
b. Press the PICK UP button
to be con-
nected
to the calling
party.
NUE?:Youmustbeinthesame@ckupgroup
clsthelingfngtelephonetopfckupthealu
400.18
CALLTRANSFER
Outside
lines can be transferred
from
one
phone
to another
within
the system.
The
transfer
can be either screened
(announced]
or unscreened
to either an idle or busy sta-
tion. or UCD or Hunt
Group.
Screened
Transfer
While connected
to an outside
line:
a.
b.
C.
d.
Press station
button
where
call ls to be
transferred
(if programmed
on your tele-
phone),
or
Press 'IRANS
button
and
dial station
number
(100 to 195).
The cakd
extension
signals
according
to the intercom
signal switch
position.
When
that
extension
answers,
an-
nounce
the transfer.
Hang up to complete
transfer.
When attempting
to locate a pax-@
a.. Press a station
key to signal a station
or
press the TFLWS button
and dial station
desired.
b. If the party is not located,
press another
station
key to continue
the search,
or
press the TFL4N button
and dial the sta-
Uon number.
C.
d.
If the party
is not
located,
press
the
lRANS
button
agafn
and dial another
statton
number
to continue
the search.
When the called patty answers,
hang up
to complete
the transfer.
Unscreened
Transfer
When the czlled extension
beglns to signal:
a Hang up to transfer
the call (Recall timer
starts).
Transfer
Search
Answering
a Screened
Transfer
Your intercom
will be signaling
according
to
the intercom
signal switch position.
a Answer
the
intercom
and
receive
the
transfer
notice.
b. Press the outslde
line button
or loop
button
flashing
on hold.
Issue
1, January
1992
400-7
Advertisement
Table of Contents
