Assigning User Function Keys; Storing/Editing The Contents Of A User Function Key - Ricoh 185 Operating Instructions Manual

ASSIGNING USER FUNCTION KEYS

You can program each of the User
Function keys ({F1}–{F4}) with a
function that you use frequently.
When you wish to use that function,
instead of having to search through
several menus to find it, just press the
appropriate User Function key. This
procedure can be used to edit, delete
or change the contents of the User
Function keys.
Note
At default the following functions
are programmed by default.
Key Standard
F1 Start Manual RX
F2 TEL Mode
F3 Transmission Result Dis-
play
F4 -
Storing/Editing the Contents
of a User Function Key
A
Make sure that the machine is in
Facsimile mode and the standby
display is shown.
Note
If the standby display is not
shown, press the {Fax} key.
ASSIGNING USER FUNCTION KEYS
B
Press the { { { { User Tools/Counter} } } } key.
C
Enter the number of the "Fax".
The Facsimile User Tool main
menu appears.
Reference
For how to use the System User
Tools, refer to the System Set-
tings manual.
D
Enter the function number for
"User Functions" using the num-
ber keys.
E
Press the User Function key you
want to use.
Note
If you make a mistake, press
Cancel and press the correct
key.
You can press [Status] to see
how the User Function keys are
currently programmed.
F
Enter the function number you
want to register into the User
7
149