Ricoh 185 Operating Instructions Manual page 59

A
Press the { { { { Pause/Redial} } } } key.
B
A list of previously dialed num-
bers will flash up. If you cannot
see the number you need use the
[↑ ↑ ↑ ↑ Prev.] and [↓ ↓ ↓ ↓ Next] keys to scroll
through them. Then enter the
code for the number you wish to
redial e.g., "01".
Limitation
The following kinds of destina-
tions are not memorized:
• Quick Dials
• Speed Dials
• Group Dials
• Destinations dialed by a Pro-
gram
• Destinations dialed as End
Receivers for Transfer Re-
quest
• Forwarding terminal of the
substitute reception.
• Destination of Memory File
Transfer
• Destinations dialed using the
external telephone keypad
• Destinations dialed by Redi-
al (regarded as already mem-
orized)
• Any destinations after the
first number if multiple des-
tinations were dialed.
Do not dial any digits before
you press the Redial key. If you
press the {Pause/Redial} key af-
ter entering digits using the
number keys, a pause will be
entered instead.
Note
If the receiver uses a facsimile of
the same manufacturer that is
capable of registering the RTI,
that name may be shown on the
display instead of the fax num-
ber.
DIALING
2
45