be lost when printed at the other
end.
Note
You can switch this feature on and
off with the User Parameters. The
default setting is on. ⇒ P.184
"Changing the User Parameters"
- Closed Network
-
-
-
If you turn this feature on, transmis-
sion will only take place if the desti-
nation's Polling ID is the same as
yours. This feature can stop you from
accidentally sending information to
the wrong place (you need to co-ordi-
nate Polling ID's with the other par-
ty).
Note
You can switch this feature on and
off with the User Parameters. The
default setting is off. ⇒ P.184
"Changing the User Parameters"
Selecting Transmission
Options for a Single
Transmission
A
Set the original and select any
scan settings you require.
B
Press [Mode].
ND1X02E1
The Transmission Mode menu ap-
pears.
C
Enter the "Options" function
number with the number keys.
Note
If "Options" is not shown, press
[↑ ↑ ↑ ↑ Prev.] or [↓ ↓ ↓ ↓ Next].
D
Press the 0 0 0 0 or 1 1 1 1 key to switch
TTI Print on or off.
Note
The default setting is on.
E
If you want to set another option,
press [↓ ↓ ↓ ↓ Next].
Note
To finish, go to step 14.
F
Press the 0 0 0 0 or 1 1 1 1 key to switch
Label Insertion on or off.
TRANSMISSION OPTIONS
4
91