Ricoh 185 Operating Instructions Manual page 189

Registering Specific Senders
(Forwarding)
A
Make sure that the machine is in
Facsimile mode and the standby
display is shown.
Note
If the standby display is not
shown, press the {Fax} key.
B
Press the { { { { User Tools/Counter} } } } key.
C
Enter the number of the Fax
mode.
The Facsimile User Tool main
menu appears.
Reference
For how to use the System User
Tools, refer to the System Set-
tings manual.
D
Enter the function number for
"Key Op. Settings" using the
number keys and press the { { { { #} } } }
(Enter) key within 3 seconds.
Note
If "Key Op. Settings" is not
shown, press [↑ ↑ ↑ ↑ Prev.] or [↓ ↓ ↓ ↓ Next].
KEY OPERATOR SETTINGS
E
Enter the function number for
"Forwarding" using the number
keys.
F
Enter the function number for
"Register Sender" using the num-
ber keys.
G
Choose a Specific Sender to regis-
ter by entering its code number.
Note
If you make a mistake, press the
{Clear/Stop} key and enter a cor-
rect number.
H
Press [RTI/CSI].
I
Register an RTI or CSI of a sender
and press [OK].
Reference
⇒ P.191 "Entering Text"
7
175