Table of Contents
Advertisement
Preparation
You need to assign the F Code fea-
ture to a User Function key before-
hand.
You cannot use Chain Dial with
this feature.
You cannot select this function
when carrying out standard Confi-
dential Transmission
Note
The ID can be up to 20 digits long
and consist of digits, spaces, * and
# .
Make sure the ID matches the
specification of the fax you are
sending to.
You can store IDs in Quick Dials,
Speed Dials, Groups and Pro-
grams.
Messages you send using this fea-
ture are marked "SUB" on all re-
ports.
A
Set your document and make any
changes to the scan settings if nec-
essary.
B
Dial the destination fax number
using the number keys.
TRANSMISSION FEATURES
C
Press the User Function key as-
signed with the F Code feature.
D
Enter the function number for
SUB(S) on the number keys.
E
Enter the ID code on the number
keys.
F
Press the { { { { Start} } } } key.
Note
If you use Immediate Transmis-
sion and the destination fax ma-
chine does not support the F
code feature, a message will ap-
pear on the display to inform
you of this. In this case, press
OK to cancel the transmission.
2
47
Advertisement
Table of Contents
