Ricoh 185 Operating Instructions Manual page 166

Facsimile User Tools
Note
If "Key Op. Settings" is not
shown, press [↑ ↑ ↑ ↑ Prev.] or [↓ ↓ ↓ ↓ Next].
E
Enter the function number for
"Personal Code" using the num-
ber keys.
F
Enter the function number for
"Reg. Pers. Code" using the num-
ber keys.
G
Enter a Personal Code using the
number keys.
7
Note
If you enter a wrong number for
the first, second, or third digit,
press the {Clear/Stop} key and
enter a correct number. If you
enter a wrong value for the
fourth digit, press Cancel and
enter the correct number from
the first digit.
If you enter a Personal code that
has already been programmed,
the contents appear on the dis-
play. If you wish to change the
name, press [Name] and enter
another name. If you wish to
program another code, press
[Cancel] and enter the new code.
152
You can press [Status] to see
which codes have been already
programmed.
H
Press [Name].
I
Enter the name.
Note
If the name has already been
programmed, it appears on the
display. If you wish to change
the name, press the {Clear/Stop}
key and enter another name.
Reference
P.191 "Entering Text"
J
Press [OK].
The entered Personal Code and
name are shown on the display.