Table of Contents
Advertisement
Facsimile User Tools
To change an existing Irregular Scan
size, just use the following procedure
to overwrite it.
Important
When registering or changing an
original size, we recommend that
you make a memo of the new size.
Limitation
For the vertical length (width), se-
lect "Auto," "A4 (210 mm)," "B4
(257 mm)," "A3 (297 mm)," "8
inch," or "11 inch."
For the horizontal length, specify
from 128 to 1200 mm or from 5.5 to
47 inches. You cannot set a length
less than 128 mm or longer than
1200 mm.
A
Make sure that the machine is in
Facsimile mode and the standby
display is shown.
7
Note
If the standby display is not
shown, press the {Fax} key.
B
Press the { { { { User Tools/Counter} } } } key.
C
Enter the number of the "Fax".
The Facsimile User Tool main
menu appears.
140
Reference
For how to use the System User
Tools, refer to the System Set-
tings manual.
D
Enter the function number for
"Register/Delete" using the num-
ber keys.
E
Enter the function for "Reg. Irreg.
Area" using the number keys.
1
/
2
Note
If the appropriate display is not
shown, press [↑ ↑ ↑ ↑ Prev.] or [↓ ↓ ↓ ↓ Next].
F
Press [Area 1] or [Area 2].
Note
If a size is already registered, it
is shown on the display.
G
Press [Vert.].
Advertisement
Table of Contents
