Ricoh 185 Operating Instructions Manual page 187

number keys and press the { { { { #} } } }
key within 3 seconds.
Note
If "Key Op. Settings" is not
shown, press [↑ ↑ ↑ ↑ Prev.] or [↓ ↓ ↓ ↓ Next].
E
Enter the function number for
"Forwarding" using the number
keys.
F
Enter the function number for
"Reg. Receiver" using the num-
ber keys.
G
Choose a receiver (Forwarding
Station) to program be entering
the its code number.
Note
If you make a mistake, press
[Cancel] and enter a correct
number.
H
Enter the Forwarding Station's
fax number using the number
KEY OPERATOR SETTINGS
keys and select the communica-
tion type, then press [OK].
Note
If you make a mistake, press the
{Clear/Stop} key and enter a cor-
rect number.
I
Press [Exit].
J
Press [PrevMenu] 3 times.
K
Press the { { { { User Tools/Counter} } } } key.
Deleting a Forwarding Station
A
Make sure that the machine is in
Facsimile mode and the standby
display is shown.
Note
If the standby display is not
shown, press the {Fax} key.
7
173