SOLVING PROBLEMS
This table lists some common problems and their solutions.
Problem
Image background appears
dirty when received at the
other end.
Printed or sent image con-
tains spots.
Received image is too light. Request the sender to in-
Message appears blank at
the other end.
You want to cancel a Mem-
ory Transmission.
You want to cancel an Im-
mediate Transmission.
Solution
Adjust the scan density.
The Document Feeder
(ADF) or exposure glass is
dirty. Clean them. See the
Copy Reference.
Make sure that ink or eras-
er is dry before setting the
original.
crease the image density.
When using moist, rough
or processed paper, the
printed image may be part-
ly invisible. Only use rec-
ommended paper.
When D is blinking, toner
is beginning to run out. Re-
place the toner cartridge
soon. ⇒See the Copy Ref-
erence.
The original was set upside
down. Set it properly.
If the original is being
stored, press the {Clear/
Stop} key.
If the original is being sent,
use "Check/Cancel TX
Files" in the Information
menu.
Press the {Clear/Stop} key.
SOLVING PROBLEMS
Refer to
P.36 "Image Density (Con-
trast)"
---
P.13 "ACCEPTABLE
TYPES OF ORIGINALS"
---
P.17 "HOW TO SET AN
ORIGINAL"
P.4 "OPERATION PANEL"
P.17 "HOW TO SET AN
ORIGINAL"
P.4 "OPERATION PANEL"
6
109