Table of Contents
Advertisement
Email alert on error occurs
Mark this check box to have the system generate an automatic email to the user when the system
encounters an error during a protocol run that was set up by that user. The email will be sent to all
email addresses entered in the Email address(es) field.
Clear this check box to discontinue sending these automatic emails to the user.
OK
This button saves any changes made on this screen.
Cancel
This button cancels any changes made on this screen and returns you to the User Management
screen.
System Settings screen
Purpose: To access tools for configuring settings that are applicable to the entire system.
To open: From the Home screen, press Settings. Then, press System Settings.
Figure 44 System Settings screen
Table 9
Button
Instrument Settings
Date & Time Settings
Chiller Setting
Connection Settings
Magnis and MagnisDx NGS Prep System User Guide
Settings screen buttons
Description
Opens the
instrument name, serial number, firmware software version, and device
version.
Opens the
system.
Opens the
module.
Opens the
by the system when connecting to the internet.
"Instrument Settings screen"
"Date & Time Settings screen"
"Chiller Setting screen"
for setting the temperature of the chiller
"Connection Settings screen"
for viewing and/or setting the
for setting the date and time of the
for configuring the IP address used
67
Advertisement
Table of Contents
