Disable User Accounts - Agilent Technologies Magnis G9710A User Manual

Figure 10 Edit User screen
4 On the Edit User screen, change any of the following attributes for the user account as desired.
•
•
•
5 If desired, change the email alert settings by marking or clearing the check boxes on the right
side of the screen.
•
•
6 Press OK to save the changes.
The Edit User screen closes and you are returned to the User Management screen.

Disable user accounts

Disabled accounts cannot be used to log in to the system. Once a user account has been
disabled, it cannot be re-enabled.
1 From the Home screen, press Settings.
The
2 Press User Management.
The
levels.
Magnis and MagnisDx NGS Prep System User Guide
Access Level (Standard or Advanced)
Password (requires updating both the Password and Confirm Password fields)
Email address(es) for sending alerts to the user
Mark Email alert on run complete to send an email to the user when a protocol run initiated
by the user completes.
Mark Email alert on error occurs to send an email to the user when the instrument
encounters an error during a protocol run initiated by the user.
Settings screen opens.
User Management screen opens listing the available user names and corresponding user
26