Set The Instrument Health Check Settings - Agilent Technologies Magnis G9710A User Manual

Figure 14 Connection Settings screen
4 Select between obtaining an IP address automatically and assigning an IP address manually.
•
•
5 Press OK to save your changes.
NOT E

Set the instrument health check settings

Based on this setting, the system can include or exclude verification of the teach points as part of
the first instrument health check (IHC) that is performed each time the instrument is powered on.
1 From the Home screen, press Settings.
The
2 Press System Settings.
The
3 Press Other Settings.
The
Magnis and MagnisDx NGS Prep System User Guide
When you select Obtain an IP Address Automatically, an IP address is automatically
assigned and the fields for network information are unavailable.
When you select Use Manual Configuration, the fields for network information are editable.
Enter the appropriate information into the fields. If needed, ask your network administrator
to provide the information.
If the system loses its network connection, or the IP address automatically
assigned to the system is an internal IP address, press Renew. Either the
previous IP address will be re-assigned to the system (if it is available) or a new
IP address will be assigned.
Settings screen opens.
System Settings screen
Other Settings screen
opens.
opens.
31