Update Protocol
This button opens the Protocol Update screen (described below), which has tools for uploading
new protocol files from a USB disk or from the Agilent website.
Close
This button returns you to the Home screen.
Protocol Update screen
Purpose: To upload new protocol files into the software from a connected USB disk drive or from
the Agilent website. See instructions in
"Install protocol updates"
on page 46.
To open: From the Home screen, press Settings. On the Settings screen press Protocol
Update.Then, press Update Protocol.
Figure 47 Protocol Update screen – USB Disk selected
Figure 48 Protocol Update screen – Online Download selected
Magnis and MagnisDx NGS Prep System User Guide
70