Table of Contents
Advertisement
2 - Names and Functions of Parts
Top panel
This section explains the displays and controls on the top panel.
NOTE
The various buttons that have indicators remain dimly lit even when off, making them easier to see and use even in dark situations.
Channel section
1 Touchscreen
o Resistive-type (pressure-sensitive) 800×480 LCD color
touch panels.
o Shows a variety of information.
o Tap and swipe the screens being shown to operate them.
o Only one point on one screen can be operated at a time.
o Set the brightness on the PREFERENCES Screen. (See
"PREFERENCES screen" on page 37.)
2 LCD knobs and indicators
o When LCD knobs can be used to control items shown on
the touchscreen, their indicators light.
o Turn those LCD knobs to adjust various parameters shown
on the touchscreen.
8
TASCAM Sonicview 16XP/Sonicview 24XP V1.5.0
Master section
NOTE
i Parameter adjustment with LCD knobs
i Turning an LCD knob without pressing it will change the
parameter value by one step with each click. This enables
precise parameter adjustment.
i When adjusting a parameter with high resolution, turning
an LCD knob while pressing it will change the parameter
value by multiple steps with each click. This enables
efficient parameter adjustment.
i By turning any LCD knob while pressing the HOME key, the
brightness of the touchscreens, channel screens, various
indicators and the lamp connected to the LAMP connector
on the rear panel can all be adjusted at the same time.
i By pressing and turning any LCD knob while pressing the
HOME key, the brightness of the touchscreens and channel
screens can be adjusted at the same time.
i By turning an LCD knob while pressing the MENU key, the
contrast of the channel screen that corresponds to that knob
can be adjusted. (See "13 - List of shortcut operations" on
page 260.)
Advertisement
Table of Contents
