Restoring Factory Default Settings - Tascam Sonicview 16XP Reference Manual

8 - Saving and recalling setting data
6.
Select the file to restore, and tap the RESTORE button.
A confirmation message will appear.
7.
Tapping the RESTORE button on the confirmation message
will restore the file.
i A confirmation message will be shown if a file with the
same name already exists on the restore destination
(internal storage).
i Tap the CANCEL button to close the confirmation
message.
i Tap the OVERWRITE button to overwrite the All
System Data file with the same name and close the
confirmation message.
i Tap the RENAME button to open the RENAME Screen.
Input a name that is not the same as an existing All
System Data name. Then, tap the Enter button to
restore the data and return to the ALL SYSTEM DATA
Screen.
i One of the following messages will be shown if the
internal storage does not have enough open space.
Cannot Restore. Internal memory is full.
206
TASCAM Sonicview 16XP/Sonicview 24XP V1.5.0

Restoring factory default settings

Unit settings can be restored to their factory default state by
clearing all unit settings to their defaults and deleting all types
of user data* saved in the internal memory.
* User data saved in internal memory includes
i Saved All System Data
i Data stored in snapshots
i Data stored in various LIBRARY Screens
1.
Tap the Factory Reset (5) button to open a message
confirming factory reset execution.
2. Tapping the CANCEL button on the confirmation message
will close the message.
Tap the CONTINUE button in the confirmation message to
open a reconfirmation message.