Preferences Screen - Tascam Sonicview 16XP Reference Manual

PREFERENCES screen

Make settings and view information as follows on this screen.
o Cooling fan operation mode and speed settings
o Cooling fan operation status display
o Temperature value and status display for various locations
o Snapshot STORE/RECALL confirmation setting
o Digital Reference Level setting
o Analog Reference Level setting
o Mute Group LED Flash setting
o Solo/Mute/Fader Speed setting
o USB Keyboard type setting
o Brightness settings for the various displays
o Contrast settings for the channel screens
Tap any of the following menu screens to open this screen.
o "Brightness" in the Front Panel Setup menu
o LAMP Dimmer Setup in the Rear Panel Setup menu
o Preferences in the System Setup menu
4 - Mixer configuration and settings
1 FAN Status
This shows the cooling fan operation status and rotation
speed.
Indicator
Green
Red
2 FAN Control buttons
Use these to set the internal cooling fan operation mode.
The selected button will be highlighted.
Button
Auto (default)
Manual
3 Temperature Status
These show the temperature values of the SYSTEM (internal
temperature), CPU and DSP.
Indicator
Green
with orange WARNING
4 Snapshot STORE Confirmation switch
Set whether or not to show a confirmation message when
storing snapshots.
When on, the sliding switch will appear highlighted.
NOTE
This can also be set by tapping the
function item area at the top of the Menu Screen and
opening the CONFIRMATION settings window. (See
"Snapshot functions" on page 186.)
5 Snapshot RECALL Confirmation switch
Set whether or not to show a confirmation message when
recalling snapshots.
When on, the sliding switch will appear highlighted.
NOTE
This can also be set by tapping the
function item area at the top of the Menu Screen and
opening the CONFIRMATION settings window. (See
"Snapshot functions" on page 186.)
6 Digital Reference Level buttons
Use these to set the digital reference level.
The selected button will be highlighted.
Options: -9dBFS, -14dBFS, -16dBFS, -18dBFS,
-20dBFS (default)
7 CH Display Contrast GANG button
This turns the Channel Screen contrast adjustment knob
GANG function on or off (default).
When the GANG function is on, the button will appear
highlighted.
When the GANG function is on, operating any LCD knob 1–3
will cause the contrast settings of all to follow, maintaining
set differences.
TASCAM Sonicview 16XP/Sonicview 24XP V1.5.0
FAN STATUS Meaning
OK Normal
FAILURE Malfunctioning
Meaning
Cooling fan operation will be controlled
automatically.
FAN Speed (8) will be shown and the
user can set cooling fan operation.
Meaning
Temperature is within normal
range
Temperature is not in normal
range
icon in the Snapshot
icon in the Snapshot
37