Sonicview 16Xp/24Xp Error Screen System Error/Alert Message List - Tascam Sonicview 16XP Reference Manual

9 - Various information displays

Sonicview 16XP/24XP Error Screen SYSTEM error/alert message list

Error/alert type Message
"Master clock name" clock has no
signal. Switched to Internal.
"Master clock name" clock is
unlocked. Switched to Internal.
"Master clock name" clock regained.
"Master clock name" clock regained.
Can be re-synced to "Master clock
System Clock Error
name".
"Master clock name" clock is locked.
SLOT [slot number] [card name] was
removed.
Slot Card Error
SLOT [slot number] [card name]
failure.
Dante Module Unavailable.
Internal Dante Error
Dante Module Available.
SYSTEM is too HOT.
Increase FAN speed.
CPU is too HOT.
Increase FAN speed.
DSP is too HOT.
Increase FAN speed.
Device Temperature Error
SYSTEM is too COLD.
CPU is too COLD.
DSP is too COLD.
SYSTEM temperature normal.
CPU temperature normal.
DSP temperature normal.
212
TASCAM Sonicview 16XP/Sonicview 24XP V1.5.0
Meaning
There is no signal from the master
clock.
The master clock is unlocked.
The master clock has been
regained (locking is possible
again after becoming unlocked).
The master clock has been
regained (locking is possible
again after becoming unlocked).
(message that appears at the top
of the screen)
The master clock is locked.
(This is shown in gray on the
INFORMATION Screen ERROR
page as a record of when locked
status was restored after a No
Signal or Unlock state error was
resolved. This is not shown at the
top of the screen.)
The expansion card was removed.
Trouble was detected with the
expansion card.
The built-in Dante module is in
an unusable state (in safe mode/
updating).
The built-in Dante module is in a
usable state.
The internal temperature of the
unit has risen.
Increase the speed of the cooling
fan.
The temperature of the CPU has
risen.
Increase the speed of the cooling
fan.
The temperature of the DSP has
risen.
Increase the speed of the cooling
fan.
The internal temperature of the
unit is too low.
The temperature of the CPU is
too low.
The temperature of the DSP is
too low.
The internal temperature of the
unit has returned to the proper
range.
The temperature of the CPU has
returned to the proper range.
The temperature of the DSP has
returned to the proper range.
Note
Master clock name:
WORD
Dante
SLOT 1 (slot signal type)
SLOT 2 (slot signal type)
Slot signal types:
AES, Dante, MADI
Slot number: 1/2
Card name:
i IF-AE16 (AES)
i IF-AN16/OUT (Analog Out)
i IF-DA64 (Dante)
i IF-MA64/BN (MADI)
i IF-MA64/EX (MADI)
This is shown in gray on the
INFORMATION Screen ERROR
page as an error record.
This is not shown at the top of
the screen.
This is shown in gray on the
INFORMATION Screen ERROR
page as an error record.
This is not shown at the top of
the screen.