Preparation Before Importing; Using Imported Files With This Unit; Mark Function; Adding Marks - Tascam Sonicview 16XP Reference Manual

Preparation before Importing

Always use an IF-MTR32 to format SD cards before using them
with an IF-MTR32 for the first time. SD cards formatted by an IF-
MTR32 are optimized for improved performance.
Operation of this unit might be affected when using an SD card
that has been formatted by a computer or other device.
1.
Use the IF-MTR32 to format the SD card. (See "6 Format
buttons" on page 244.)
NOTE
When formatted by an IF-MTR32, a "PROJECT" folder will
automatically be created at the root level.
2.
Remove the formatted SD card and load it in an SD card
reader connected to a computer.
3.
When a card has been formatted by an IF-MTR32, the
computer will recognize it as a drive named "IF-MTR32".
4. Copy the audio files that you want to load to a folder on the
"IF-MTR32".
5. When finished copying, remove the SD card from the card
reader and load it in the IF-MTR32.

Using imported files with this unit

o If audio files have been added to the current project, those
that can be played will automatically be recognized as takes.
o When audio files have been added outside the current
project, if the added folder is selected as the current project
on the BROWSE MTR Screen, those files that can be played
will automatically be recognized as takes.
12 - Multitrack Recorder

Mark function

Marks can be used to cue for playback, for example.
In addition to use with this unit, mark information added to WAV
files can be used with software, for example, that supports the
BWF format.

Adding marks

When playing or recording, the SET button on the MULTI TRACK
RECORDER Screen can be tapped to add a mark at the current
point.
o When a mark is added, a pop-up showing the mark number
appears on the display.
o 5 icons appear below the playback progress bar at the
positions where marks are set.
o Marks added during recording/playback will automatically be
saved in the WAV file when recording/playback stops.
o Marks added when stopped will automatically be saved in
the WAV file at the following times.
i When playback is started and then stopped after they
have been set
i When switching to a different take
NOTE
Punch in/out points are types of marks, but they are different
from marks set using the SET MARK button in the following
ways.
i Marks set using the SET MARK button are saved in WAV
files.
i Punch in/out points are not saved in WAV files and are
discarded by the following operations.
i Changing the MTR operation mode
i Switching projects or takes
i Starting recording when in LIVE RECORDING or
VIRTUAL SOUND CHECK mode
i Turning off the power for the unit
TASCAM Sonicview 16XP/Sonicview 24XP V1.5.0
257