Simultaneous Asio/Wdm Playback; Setting Procedures For Use With Obs Studio And Other Streaming Applications - Tascam Sonicview 16XP Reference Manual

Multitrack recording console
Table of Contents

Advertisement

11 - USB audio interface functions

Simultaneous ASIO/WDM playback

The driver for this unit can simultaneously play ASIO output
from a DAW and WDM output from Windows Media Player, for
example. The sample rates of both sources must be set to the
same value for simultaneous playback to be possible. Moreover,
the sample rate must also be set to the same value for both
playback and recording in the Windows Sound Properties.
When the sample rates are the same
Example: Windows (WDM) at 48000 Hz, ASIO at 48000 Hz
The Windows audio and ASIO sound are mixed and played
simultaneously.
When the sample rates are different
Example: Windows (WDM) at 48000 Hz, ASIO at 96000 Hz
Only sound from a DAW and other ASIO sources are output.
Sound from Windows Media Player and other WDM sources are
not output.
When the DAW is shut down, for example, and output from ASIO
sources stops, sound from Windows Media Player and other
WDM sources will become audible.
Setting procedures for use with
OBS Studio and other streaming
applications
Conduct the procedures in this document before launching the
streaming application.
Windows computer sound settings
Set the input and output device, sampling frequency, bit rate,
and number of channels according to the setup.
1.
Open the Sound Settings screen.
NOTE
This can also be opened by right-clicking the sound icon
at the bottom right of the desktop screen, selecting "Open
Sound settings" and then selecting "Sound".
230
TASCAM Sonicview 16XP/Sonicview 24XP V1.5.0
2.
Set the output device to "Speakers (Sonicview 16/24)".
3.
Set the input device to "Microphone (Sonicview 16/24)".
4.
Click "Sound Control Panel" to open the Sound window.
5.
Open the Recording tab, and select "Sonicview 16/24".
6.
Click "Properties" for "Sonicview 16/24" to open the
Microphone Properties screen.
7.
Open the Advanced tab, and set the Default Format.
i Select a 2-channel setting when using OBS Studio or
another application that supports 2-channel audio
devices. Otherwise, select a 32-channel setting.
i Set the "Default Format" sample rate to match the
sample rate of the application being used to stream

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sonicview 24xp

Table of Contents