Names And Functions Of Parts; Front Panel - Tascam SS-CDR250N Owner's Manual

Solid state recorder
Table of Contents

Advertisement

Front panel

SS-CDR250N
SS-R250N
STANDBY/ON button and indicator
1
Press this button to turn the unit on and off (standby).
The STANDBY/ON indicator lights when the unit is off.
CAUTION
Before turning the unit on, lower the volumes of connected
equipment to their minimum levels.
Failure to do so could result in a sudden loud noise that could
harm hearing, for example.
NOTE
When the power is on, press and hold this button for about
nine seconds or more to force the unit to restart.
Do not do this when the unit is operating (including record-
ing, playing back, or writing data to an SD card, USB flash
drive or CD). Doing so could cause proper recording to fail
and recorded data to be lost.
Disc insertion slot (SS-CDR250N only)
2
Insert CDs here.
After a disc is inserted part way, it will automatically be pulled
in.
Disc force ejection (emergency) hole (SS-CDR250N
3
only)
If pressing the EJECT button does not eject the disc because
the CD drive is not functioning, for example, use this to force
the disc to eject. (See "Force disc ejection" on page 28.)
CAUTION
Only use this in an emergency. Turn the unit off (put it in
standby) before using it.
EJECT button (SS-CDR250N only)
4
Press this button to eject the disc.
Display
5
This shows a variety of information.
HOME [INFO] button
6
i When a Menu or BROWSE screen is open, press this button
to return to the Home Screen.
2 – Names and Functions of Parts
i When the Home Screen is open, press this button to
change the Home Screen display mode. (See "Home
Screen" on page 17.), (See "Recording Screen" on page
19.)
TRACK
TOTAL
i Press this button and the MEDIA button at the same time
to open the LOCK SETUP screen. (See "Setting the lock func-
tion" on page 30.)
i Press this button while pressing the SHIFT button to show
the operation status of the unit. (See "Opening the INFOR-
MATION screen" on page 30.)
MENU [JOG] button
7
i When the Home Screen is open, press this button to open
the Menu Screen., (See "Menu structure" on page 20.)
and (See "Basic Menu Screen operations" on page 22.)
i When the Menu Screen is open, press this button to
change the menu page.
i When the Menu Screen is open, press this button while
pressing the SHIFT button to change the menu page in re-
verse direction.
i When a sub menu screen is open, press this button to go
back one step in the menu.
i Press this button while pressing the SHIFT button when
playing back, in playback standby or stopped on the Home
Screen to enable jog playback mode. (See "Jog playback"
on page 33.)
i Press this button when a pop-up message is open to close
it.
KEY [EDIT] button
8
i When the Home Screen is open, press this button to open
a pop-up window where you can change the key with the
key control function. (See "Using the key control function"
on page 34.)
When this pop-up is open, press the MULTI JOG dial to
turn the key control function on/off.
When this pop-up is open, turn the MULTI JOG dial to
change the key.
i Press this button while pressing the SHIFT button to open
the edit menu pop-up. (See "Edit menu operations" on
page 70.)
TASCAM SS-CDR250N / SS-R250N
TITLE
FOLDER
13

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ss-r250n

Table of Contents