Table of Contents
Advertisement
2 - Names and Functions of Parts
9 PAN area
o This shows the pan/balance setting of the signals sent to
the MAIN L/R bus as well as the MAIN L/R bus assignment
status.
o Tap this area to show the selection frame. When the
selection frame is shown, corresponding LCD knobs can
be used to adjust the pan/balance of the sent signals.
o Tap this area while pressing the HOME key to set the
tapped pan/balance setting to center (C). (See "13 - List of
shortcut operations" on page 260.)
o When the selection frame is shown, tap this area to open
the MODULE (SEND/ PAN) Screen. (See "MODULE (SEND/
PAN) Screen" on page 160.)
0 NAME area
o The module name is shown at the top left.
o At the top right, the Mute Group assignment status is
shown in the top line and the DCA assignment status
is shown in the bottom line. Red numbers show the
assigned Mute Group numbers. Yellow numbers show the
assigned DCA numbers.
See "Mute Group Assign page" on page 180 and
"MODULE (OVERVIEW) Screen" on page 130 for changing
Mute Group assignments.
See "DCA Assign page" on page 179 and "MODULE
(OVERVIEW) Screen" on page 130 for changing DCA
assignments.
o The bottom line shows the user module name (name set
by user). If the name has not been defined, the module
name will be shown as "ST IN 1" or "FX RTN 1", for example.
See "Setting and editing user module names" on page
183 for details about setting user module names.
o The NAME area background color is the color set for the
assigned module. See "Changing set module colors" on
page 184 to change set module colors.
o Tap this area to open the MODULE (OVERVIEW) Screen.
(See "ST IN 1–2 MODULE (OVERVIEW) Screens" on page
136.)
24
TASCAM Sonicview 16XP/Sonicview 24XP V1.5.0
MIX 1–22 and MAIN L/R Master Module
Home Screen
MIX 1–22 and MAIN L/R Master Module Home Screen
MIX 1–22 and MAIN L/R Master Module Home Screen details
1 OUTPUT area
o This shows the output port assignment status.
i If a Dante port that has a mounted SB-16D assigned is
selected, "SB#[ID] [port number]" will be shown.
If it is a virtually-mounted SB-16D,
left of the port name.
will appear to the
Advertisement
Table of Contents
