Tascam Sonicview 16XP Reference Manual page 143

a PAN/BAL (MIX 1–22 modules only)
o This adjusts the panning/balance of the signals sent to the
MAIN L/R bus. Turn LCD knob 8 (lit yellow) to adjust it.
Range: L100 – C – R100 (default: C)
o When the icon is highlighted (
being sent to the MAIN L/R bus.
o Tap this area to open the MODULE (SEND/PAN) Screen for
the selected module. (See "MODULE (SEND/PAN) Screen"
on page 160.)
NOTE
Tap this area while pressing the HOME key on the top panel
to set panning/balance to center (C).
), signals are
6 - Modules
TASCAM Sonicview 16XP/Sonicview 24XP V1.5.0
143