Rear Panel - Tascam Sonicview 16XP Reference Manual

Rear panel

Sonicview 16XP
Sonicview 24XP
c LAMP jack
Use this to connect a gooseneck lamp to the illuminate the
top of the unit.
Lamps with 4-pin XLR connectors can be used.
Adjust the lamp brightness on the PREFERENCES Screen.
(See "PREFERENCES screen" on page 37.)
o XLR 4-pin female (pin 4: +12V, pin 3: GND)
v MIC/LINE input jacks
These are balanced XLR jacks for mic/line input.
o XLR (1: GND, 2: HOT, 3: COLD)
2 - Names and Functions of Parts
b LINE IN (BAL) jacks (TRS phone)
These are 6.3mm (1/4") TRS phone jacks for line input.
o TRS (Tip: HOT, Ring: COLD, Sleeve: GND)
NOTE
i This unit has some channels with two types of input jacks
(XLR and TRS). Do not input signals through both the XLR and
TRS jacks of the same channel at the same time. If signals are
input at the same time, they will not be input properly.
i Only MIC/LINE input jacks (v) provide phantom power.
TASCAM Sonicview 16XP/Sonicview 24XP V1.5.0
13