Rec Ready/Input Monitor Settings - Tascam Sonicview 16XP Reference Manual

REC READY/INPUT MONITOR settings

Tap the MULTI TRACK RECORDER Screen meter/REC READY/
INPUT MONITOR area (6) to open a REC READY / INPUT
MONITOR settings window below the meters for the group of 8
tracks in the area tapped.
o REC READY setting buttons are in the upper row and INPUT
MONITOR setting buttons are in the lower row for the
selected 8 tracks.
o Tap these buttons to turn them on/off.
o The REC READY setting buttons show the routing settings for
the tracks as follows.
i Top line: Track input signal
i Bottom line: Track signal output destination
o Tap the button at the top right of the REC READY / INPUT
MONITOR settings window to close the window and restore
the normal MULTI TRACK RECORDER Screen.
o When INPUT MONITOR is on, the signal input to the MTR
will be output from the MTR as is, regardless of the MTR
operation status and REC READY on/off status.
12 - Multitrack Recorder
o When REC READY is on
i When stopped or recording, sound input to the MTR will
be output from the MTR as is.
i During playback, the MTR playback sound is output from
the MTR.
o Tap the REC READY ALL ON/ALL OFF button to turn it on/off
for all tracks.
The ALL ON and ALL OFF buttons show the REC READY
setting status.
REC READY setting ALL ON button
status appearance
When all tracks are on
When all tracks are off
When some tracks are
on and some are off
o Tap the INPUT MONITOR ALL ON/ALL OFF button to turn it
on/off for all tracks.
The ALL ON and ALL OFF buttons show the INPUT MONITOR
setting status.
INPUT MONITOR ALL ON button
setting status appearance
When all tracks are on
When all tracks are off
When some tracks are
on and some are off
TASCAM Sonicview 16XP/Sonicview 24XP V1.5.0
ALL OFF button
appearance
ALL OFF button
appearance
241