Related Manuals for Tascam GB-10
Summary of Contents for Tascam GB-10
- Page 1 D01128320B GB-10 Guitar & Bass Trainer/Recorder This device has a serial number located on the bottom panel. Please record it and retain it for your records. Serial number: __________________ OWNER’S MANUAL...
-
Page 2: Important Safety Instructions
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. TASCAM GB-10... - Page 3 13 Unplug this apparatus during lightning storms or when unused for long periods of time. 14 Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord TASCAM GB-10...
- Page 4 If this should happen, wash it off with clean water and then consult a doctor immediately. • The unit power should be off when you install and replace batteries. TASCAM GB-10...
- Page 5 IMPORTANT SAFETY INSTRUCTIONS TASCAM GB-10...
-
Page 6: Table Of Contents
Using an AC adaptor (sold separately) ....... 41 Beware of condensation .............. 22 Startup and shutdown ..............42 Cleaning the unit ................22 Turning the power on ............... 42 2 – Names and Functions of Parts ......23 Setting the power to standby ..........42 TASCAM GB-10... - Page 7 Editing the playlist ..............63 Recording duration ................ 52 9-Special Playback (playback control function) ..66 6–Working with Files and Folders (BROWSE screen) Changing the speed ..............66 ..................53 Changing the key ................66 BROWSE screen navigation ............53 TASCAM GB-10...
- Page 8 Ratings ....................95 Setting the metronome ..............79 Input ratings ..................95 Starting and stopping the metronome ........79 Analog audio input ..............95 15-System settings ............80 output ratings .................. 95 System settings(SETUP) ..............80 Analog output ratings .............. 95 TASCAM GB-10...
- Page 9 Table of Contents Control input/output ratings ..........95 Audio performance ................ 96 Computer compatibility ............... 96 Other specifications ............... 97 Dimensional drawings ..............97 TASCAM GB-10...
-
Page 10: Quick Start Guide
Formatting is necessary if you insert a new SD card. (Formatting will erase all the data on the card.) For details, see “Inserting and removing SD cards” on page 37. TASCAM GB-10... - Page 11 Using USB bus power Using an AC adaptor (sold separately) Connect the unit with a computer using the included USB Connect a TASCAM PS-P520 AC adaptor (sold separately), cable. which is designed for the specifications of this unit, to the DC IN 5V jack.
-
Page 12: Step 2: Copy Audio Files From A Computer
Transfer files from the computer ª Connect headphones or speakers Copy audio files to the MUSIC folder on the GB-10 drive that Connect headphones or a monitoring system (such as appears on the computer. powered speakers or an amplifier and speakers) to this unit’s ª... -
Page 13: Step 4: Tune The Instrument
Press and hold the EFFECT button to open the screen EFFECT where you can make detailed settings. For details, see Chapter 13 “Using the tuner” on page 77. For details, see Chapter 12 “Using the built in effects” on page TASCAM GB-10... -
Page 14: Step 6: Adjust The Input And Output Levels
G.IN is BALANCE ). When G.IN is OFF ( ON ( ), changing the BALANCE Use the INPUT level dial on the right side panel to adjust the value has no effect on the volume. GUITAR IN input level. TASCAM GB-10... -
Page 15: Step 7: Play Along With The Music
OUT point and start loop playback of the interval between the points. After making the setting, press the HOME button to return to the Home Screen. TASCAM GB-10... -
Page 16: Step 8: Record Your Performance
Press the ] button to stop recording. ª gradually increase it as you become more proficient. For details, see “Recording” on page 46. Press the SPEED button to show the speed setting at the bottom of the display. TASCAM GB-10... -
Page 17: Step 9: Record Over A Song (Overdub)
Step 11: Turn off the power overdubbing will not be possible. To turn the power off (put the unit in standby), press the ] button and hold it until the shutdown screen appears. ª TASCAM GB-10... -
Page 18: 1-Introduction
1–Introduction Thank you very much for purchasing the TASCAM GB-10 Auto recording function can detect the sound input level • Guitar & Bass Trainer/Recorder. Please read this Owner’s to start recording automatically Manual carefully in order to maximize your use of all the Recording continues automatically in a new file without •... -
Page 19: Included Items
About this manual Can be powered by two AA batteries, USB bus power or a • TASCAM PS-P520 AC adaptor (sold separately) Files saved on a computer can be transferred (copied) to • In this manual, we use the following conventions: the SD card in this unit via USB “SD memory card”... -
Page 20: Intellectual Property Rights
Intellectual property rights of Microsoft Corporation in the United States and/or other countries. Apple, Macintosh, iMac, Mac OS and Mac OS X are trade- TASCAM is a trademark of TEAC Corporation, registered in • • marks of Apple Inc. the U.S. and other countries. -
Page 21: About Sd Cards
A list of SD cards that have been tested with this unit can be permission from the copyright holder or the rightful found on the TASCAM web site (www.tascam.com/). licensor, your unauthorized recording, reproduction or distribution thereof may result in severe criminal penalties Use of cards that have not been verified for use with this unit under copyright laws and international copyright treaties. -
Page 22: Precautions For Placement And Use
Places with bad ventilation or high humidity • benzene, thinner and alcohol because they might cause damage to the surface of the unit. Very dusty locations • Avoid installing this unit on top of any heat-generating • electrical device such as a power amplifier. TASCAM GB-10... -
Page 23: Names And Functions Of Parts
This lights if the input signal level is too high. file playback, press this button to return to skip to the beginning of the previous file. When stopped at the beginning of a file, press this button to skip to the beginning of the previous file. TASCAM GB-10... - Page 24 Press and hold to turn the power ON or put the unit into Press and hold to search backward continuously for as standby. long as the button is pressed. When the beginning of the current file is reached, searching stops there. TASCAM GB-10...
- Page 25 ON, press briefly to start recording standby. screens. When in recording standby, the indicator blinks. Press and hold when stopped to enable prerecording (2 seconds maximum) and start recording standby. When in recording standby, the indicator blinks. Press during TASCAM GB-10...
- Page 26 Press to change the playback speed. For details, see “Changing the key” on page 66. t TUNER button Press to tune the connected guitar/bass. Use the VALUE (+/–) buttons to increase/decrease the playback speed. For details, see “Changing the speed” on page 66. TASCAM GB-10...
- Page 27 When the Home Screen is open, press this button to open NOTE screen. MENU setting only affects the volume when G.IN is BALANCE ). When G.IN is OFF ( ON ( ), changing the BALANCE value has no effect on the volume. TASCAM GB-10...
- Page 28 Â ¯ button again to change the IN/OUT point. Use buttons to find the location in the Á Ô track where you want to set each point. Press briefly again to turn the loop playback function OFF. TASCAM GB-10...
-
Page 29: Left Side Panel
43.) Use this standard mono 6.3-mm (1/4”) jack to connect a guitar or bass. s REMOTE jack Connect a TASCAM RC-3F foot switch (sold separately), which is designed for use with this unit, to this 2.5-mm TRS jack. TASCAM GB-10... -
Page 30: Rear Panel
2–Names and Functions of Parts Rear panel Bottom panel h DC IN 5V jack Connect a TASCAM PS-P520 AC adaptor (sold separately), which is designed for the power requirements of this unit. Battery compartment cover TASCAM GB-10... -
Page 31: Home Screen
5 GUITAR input ON/OFF status This shows whether input through the GUITAR IN jack is 1 Playback speed status ON or OFF. Depending on the playback speed setting, the icon : GUITAR input OFF appears as follows. : GUITAR input ON TASCAM GB-10... - Page 32 ” icon appears at the soon switch to standby. corresponding position beneath the playback position bar. When using a TASCAM PS-P520 AC adaptor (sold When an ending point is set, the “ ” icon appears at the separately) or USB bus power, the AC ( ) icon is shown.
-
Page 33: Recording Screen
50–90% speed 2 Prerecord or auto record function status When prerecording is enabled and the unit is in recording standby, “PRE”( appears here. When the auto record function is enabled and the unit is recording, “A.REC” ( appears here. TASCAM GB-10... -
Page 34: Menu Structure
(hours: minutes: seconds). switch as a remote control. SETUP Make various unit settings. See on page 80. 8 Remaining recording time This shows the remaining amount of recording time available (hours: minutes: seconds) on the current SD card TASCAM GB-10... -
Page 35: Using The Menu
Press the HOME button to return to the Home Screen. 3. Use the /BROWSE and buttons to select the § ¶ desired setting item. (When selected, the “:” becomes “ ” and the setting value appears as light letters on a ∑ dark background.) TASCAM GB-10... -
Page 36: Basic Operations
BROWSE button  Use this button to move the cursor (change the highlighted item) left on a setting screen and to close the open folder on the screen. BROWSE TASCAM GB-10... -
Page 37: 3-Preparation
1. Remove the battery compartment cover. If there are batteries in the compartment, confirm that the unit power is OFF and then remove them. 3. Insert the card and close the cover. If you are using batteries, insert them first before closing the cover TASCAM GB-10... -
Page 38: Removing An Sd Card
Remove the SD card if you do not wish to format it. A list of SD cards that have been verified to work with this • unit is posted on the TASCAM website (http://www.tascam. CAUTION com/). Formatting will erase all the data on the card. -
Page 39: Special Cases
In this case,format the card to use it with this unit. If you slide the protect switch to the “LOCK” position, file SD cards that have been formatted by a TASCAM DR series recording and editing will not be possible. Move the switch to device, however, are compatible with this model. -
Page 40: Powering The Unit
This unit can be powered by two AA batteries, USB bus power for proper operation. (See “Setting the battery type” on page or a TASCAM PS-P520 AC adaptor (sold separately). 80.) This unit can use either alkaline or nickel-metal hydride CAUTION (NiMH) batteries. -
Page 41: Using An Ac Adaptor (Sold Separately)
CAUTION from the USB bus even if batteries are also in the unit. Never use any adaptor other than the TASCAM PS-P520 AC adaptor (sold separately), because it is designed for the power requirements of this unit. Use of a different adaptor could cause malfunction, fire or electric shock. -
Page 42: Startup And Shutdown
GUITAR & BASS TRAINER/RECORDER appears. Turning the power on When the unit is in standby mode, press and hold the ª button until the “ ” startup screen opens. TASCAM GB-10 The Home Screen opens after the unit completes startup. TASCAM GB-10... -
Page 43: 4-Connecting
BROWSE or §/ button to select “ ” and press the button. ¶/ Á STORAGE “ ” pop-up screen appears on the screen. USB connected (Select “ ” to power the unit from the computer BUS POWER USB bus.) TASCAM GB-10... -
Page 44: Disconnecting From A Computer
BASS GUITAR The GB-10 drive contains MUSIC and UTILITY folders. Disconnecting from a computer After using the correct procedures to dismount the “GB-10” drive from your computer, disconnect the USB cable. The unit should automatically turn off. Please refer to the operation manual for your computer system for instructions about the correct procedures for dismounting an external drive. -
Page 45: 5-Recording
¶/ Adjusting the input level You can adjust the level of the guitar/bass input. Use the INPUT volume control on the right side panel to adjust the input level of the GUITAR IN jack. TASCAM GB-10... -
Page 46: Recording
º To pause recording, press the RECORD [ º ] button. To resume recording to the same file, press the RECORD [ º resume recording to the same file, press the RECORD [ º button again. button again. TASCAM GB-10... -
Page 47: Recording The Input Sound With The Playback Sound (Overdubbing)
VALUE (+/–) buttons to adjust the level of the playback sound. The range is from “ ” (minimum) to When overdubbing, You cannot use the auto-record or • “ ” (maximum), and the default value is “ ”. manual file incrementation functions. TASCAM GB-10... -
Page 48: Starting And Pausing Recording Automatically (Auto Rec)
AUTO REC If no file that can be played back has been selected, the 3. Use the BROWSE and buttons to select the §/ ¶/ following pop-up message appears. MODE item. TASCAM GB-10... - Page 49 When overdubbing, the auto-recording function cannot be standby and RECORD [ ] button indicator blinks. º used. Press and hold the RECORD [ ] button to enable the pre- º record function and put the unit into recording standby. TASCAM GB-10...
-
Page 50: Track Incrementation
1. Use the button, button, or screen to  ¯ BROWSE When overdubbing, the track incrementation function • select the file that you want to divide. cannot be used. 2. Press the MENU button to open the screen. MENU TASCAM GB-10... - Page 51 5. Press the button to divide the file. Á same name as the name that would be given to a new file Press the ª ] button to cancel division and return to created by division. screen. DIVIDE TASCAM GB-10...
-
Page 52: Recording Duration
SD/SDHC card being used. The recording times shown above are not continuous • recording times, but rather they are the total possible recording times for the SD/SDHC card. This unit only records in 44.1 kHz, 16-bit WAV format. • TASCAM GB-10... -
Page 53: 6-Working With Files And Folders (Browse Screen)
Screen have the BROWSE that contains the file that was selected on the Home Screen following meanings. are shown. MUSIC folder ( The MUSIC Folder is the highest (root) level folder in the hierarchy shown on the Screen. BROWSE TASCAM GB-10... -
Page 54: File Operations
Á ] button to cancel deletion. ª Use the BROWSE and buttons to select the desired § ¶ item, and press the Á button to execute one of the following operations. TASCAM GB-10... -
Page 55: Folder Operations
Return to the Home Screen and select the first file in the folder. This folder becomes the new playback area regardless of the previous playback area setting. When recording, files are created in the folder selected using this operation. TASCAM GB-10... -
Page 56: Delete The Selected Playback File (Quick Delete)
] button to cancel. ª NOTE You cannot erase read-only files or files that are not recognized by this unit. CANCEL No operation is conducted and the selected folder is left as is. TASCAM GB-10... -
Page 57: 7-Playback
Selecting a file NOTE SD cards that have been formatted by a TASCAM DR series device can also be used with this unit. During playback or when stopped, use the  ¯... -
Page 58: Searching Forward And Backward
In this case, use the BALANCE button to set “ ” to its maximum. BALANCE TASCAM GB-10... -
Page 59: Adjusting The Balance Between Playback And Input Signals
When the guitar input is off, the BALANCE setting is canceled ). When G.IN is OFF( ON ( ), changing the BALANCE and the playback level returns to its original setting. value has no effect on the volume. TASCAM GB-10... -
Page 60: 8-Playback Area And Playlist
“ §/ ¶ If you select this, but there is no playlist defined, a “ PLAY ” and press the button or button to open Á ¯ ” pop-up appears. MODE PLAYLIST screen. PLAY MODE TASCAM GB-10... -
Page 61: Selecting A Folder For The Playback Area (1)
For instructions about using the screen, see BROWSE “ ”) is shown at the bottom left of the Home Screen. P.LIST “BROWSE screen navigation” on page 53. 3. Press the button to open the pop-up menu shown Á below. Playback area indication TASCAM GB-10... -
Page 62: Selecting A Folder For The Playback Area (2)
The Home Screen automatically reopens and that file starts playing back. Moreover, the folder that contains that file 2. Use the BROWSE and buttons to select the §/ ¶ becomes the playback area regardless of the previous desired folder (light on dark). playback area setting. TASCAM GB-10... -
Page 63: Playlist
“ ” menu item, and press the button to Á 2. Select the file that you want to add to the playlist and PLAYLIST open the screen. press the button to open the following pop-up Á PLAYLIST menu. TASCAM GB-10... - Page 64 Play the file and return to the Home Screen. ALL CLR A confirmation message appears to confirm that you want to remove all the files from the playlist. Press the Á button ] button to cancel this to remove all the files or the ª operation. TASCAM GB-10...
- Page 65 In the above example, the file in the 4th position has been moved to the 3rd position. 2. Press the button to complete the movement and Á return to the ordinary PLAYLIST screen. (The file number no longer appears light on dark.) TASCAM GB-10...
-
Page 66: 9-Special Playback (Playback Control Function)
150% ( ) of the original speed in 10% increments (default x1.5 value: “ ”). x1.0 KEY can be set in a range of ±6 semitones ( â 6– ã 6). (The default value is “ ”.) TASCAM GB-10... -
Page 67: Tascam
(Default value: “2” seconds) as light letters on a dark background on the Home Screen. 6. After completing the setting, press the HOME button to return to the Home Screen. Jump back a set amount and continue playback (flashback) TASCAM GB-10... -
Page 68: 10-Loop Playback/Repeat Playback/Single Track Playback
The current position is set as the IN (starting) point. IN (starting) point to the desired position. Press the 2. Press the LOOP button at the point when you want loop button to save the IN (starting) point. Â playback to stop. TASCAM GB-10... -
Page 69: Using Loop Playback With The Playlist
The word “ ” is LOOP NOTE followed by a number. Use the VALUE (+/–) buttons to Use the buttons to switch between IN Â ¯ • set the number to 1–5. (starting) and OUT (ending) points. TASCAM GB-10... -
Page 70: Turning Loop Playback On And Off
• (starting) or OUT (ending) point. (This is not possible when Turning loop playback on and off there is no IN (starting) and OUT (ending) point.) Press the LOOP button briefly to turn loop playback ON or OFF. TASCAM GB-10... -
Page 71: Repeat And Single Track Playback
If you start loop playback, the REPEAT item automatically MODE switches to OFF if it is in a different mode. 3. Use the /BROWSE and buttons to select the § ¶ “REPEAT” item, and use the VALUE (+/–) buttons to set TASCAM GB-10... -
Page 72: 11-Transferring Songs To And From A Computer
WAV (44.1 kHz, 16/24-bit) audio file formats. with a computer” on page 43.) NOTE 2. Click the GB-10 drive that appears on the computer to Instead of using USB to connect this unit and a computer, you open it, revealing UTILITY and MUSIC folders. -
Page 73: Transferring Audio Files To A Computer
USB cable. (Please refer to the operation manual for your computer system for instructions 1. Click the GB-10 drive that appears on the computer to about the correct procedures for dismounting an open it, revealing UTILITY and MUSIC folders. -
Page 74: 12-Using The Built-In Effects
§ ¶ buttons to select an item, and Press and hold the EFFECT button to open the EFFECT use the VALUE (+/–) buttons to change the setting. screen. GAIN Adjust the gain level. MASTER Set the master volume. TASCAM GB-10... - Page 75 ATTACK Set how quickly the compressor starts taking effect. The higher the value is, the longer it takes for the compressor to start. LEVEL Adjust the volume of the compressor. ON/OFF This turns this effect on and off. TASCAM GB-10...
- Page 76 Á selected user preset number. TYPE Select the kind of effect from one of the following options: CHORUS FLANGER PHASE TREMOLO AUTO WAH DELAY For details, see the “Effect Module Parameters List” on page TASCAM GB-10...
-
Page 77: 13-Using The Tuner
The options are Á AUTO ( ] : chromatic tuner mode) and OSC. ( ª Á : oscillator mode). After selecting the mode, press the TUNER button again to make settings for that mode. TASCAM GB-10... -
Page 78: Chromatic Tuner Mode (Auto)
The longer the bar is OSC NOTE the more out of tune the instrument is. Set the pitch of the tuning tone (C3–B5). OSC LEVEL Set the output level of the tone between 0 and 10 (default value 7). TASCAM GB-10... -
Page 79: 14-Using The Metronome
Use the VALUE (+/–) buttons to change the setting value. TEMPO Set the speed to a value between beats per minute (BPM). The default value is BEAT Set the accent frequency between . There is no accent when set to . The default value is TASCAM GB-10... -
Page 80: 15-System Settings
This setting is used to show the amount of remaining battery charge and to determine if the unit has enough power for normal operation. Options: “ ” (alkaline batteries, default value), “ ” ALKAL Ni-MH (nickel-metal hydride batteries) TASCAM GB-10... -
Page 81: Restoring The Default Values (Factory Settings)
” appears light on dark). FORMAT Exec 1. Use the /BROWSE and buttons to Use the § ¶ § 2. Press the button to open a confirmation pop-up Á BROWSE and buttons to Select the “ ¶ QUICK TASCAM GB-10... -
Page 82: Changing The File Name Prefix
¯ CAUTION use the VALUE (+/–) buttons to set the characters. When formatting a card, use a TASCAM PS-P520 AC adapter After completing the setting, press the HOME button to (sold separately), USB bus power or confirm that the batteries return to the Home Screen. -
Page 83: 16-Using The Footswitch
This unit has a REMOTE jack to which you can connect 4. Use the VALUE (+/–) buttons to change the “MODE” item. a TASCAM RC-3F footswitch-type remote control (sold separately) that can be used to operate the unit. FOOT SW... -
Page 84: 17-Viewing File Information
Home Screen, or press the MENU button to open the MENU TITLE screen. Shows the file name. If an MP3 file has ID3 tag title information that information appears instead. DATE Shows the date and time that the file was created. TASCAM GB-10... -
Page 85: Card Information Page
The CARD page shows the use status of the currently inserted SD card. TOTAL MUSIC Shows the number of playable files in the MUSIC Folder. TOTAL FOLDER Shows the number of folders in the MUSIC Folder. TOTAL SIZE Shows the total SD card memory capacity. TASCAM GB-10... -
Page 86: System Information Page
SYSTEM settings and firmware version. CUE/REV SPD Shows the speed of forward and backward searching. AUTO OFF Shows the automatic power OFF setting. BATTERY This shows the battery setting. System Ver. Shows the system firmware version. TASCAM GB-10... -
Page 87: 18-Effect Module Parameters List
Higher value adds more resonance the source sound. OFF/ON Turns effect ON or OFF TREMOLO Adds a cyclical change to the volume. SPEED Adjusts cycle speed DEPTH Adjusts depth of volume change OFF/ON Turns effect ON or OFF TASCAM GB-10... - Page 88 Thickens sound or creates an echo-like TIME Adjusts delay time of effect sound effect by adding a delayed copy to the Adjusts volume of repeating sound source sound. Higher values increase the repetitions LEVEL Adjusts volume of effect sound TASCAM GB-10...
-
Page 89: 19-Messages
19–Messages The following is a list of the popup messages that might appear on the GB-10 under certain conditions. Refer to this list if one of these popup messages appears and you want to check the meaning or determine a proper response. - Page 90 Format CARD button GB-10 to conduct FAT formatting of cards to be used with it. Change the card or press the Á when this message appears to format the card in FAT format. CAUTION: Execution of FAT formatting erases all data currently on the card.
- Page 91 AC adaptor (if connected). If the error message continues to appear, please contact a TEAC Repair Center. Remote Cmd Remote Rx System Err 50 System Error 1 System Error 2 System Error 3 System Error 4 TASCAM GB-10...
- Page 92 If any of these errors occur, turn the unit power OFF and restart it. If the power cannot be turned OFF, remove the batteries and disconnect the AC adaptor (if connected). If the error message continues to System Error 7 appear, please contact a TEAC Repair Center. System Error 8 System Error 9 TASCAM GB-10...
-
Page 93: 20-Troubleshooting
TASCAM Service Center. If you are trying to play an MP3 file, confirm that the bit •... - Page 94 The playback sounds unnatural. standby mode. Confirm that the playback pitch is not being adjusted. • Confirm that the playback speed is not being adjusted. • ª I cannot erase a file. Is the SD card write-protect switch engaged? • TASCAM GB-10...
-
Page 95: 21-Specifications
: USB 2.0 HIGH SPEED, mass storage class GUITAR IN jack REMOTE jack Connector : 1/4” (6.3 mm) mono Connector : 2.5mm TRS Input impedance : 800 kΩ Nominal input level : –13 dBV (0.2V) , (INPUT volume at 7) TASCAM GB-10... -
Page 96: Audio Performance
64 MB or more memory 70 dB (GUITAR IN) USB port (USB 2.0 recommended) Recommended USB host controller Intel chipset Supported OS Windows : Windows XP , Windows Vista , Windows 7 Macintosh : Mac OS X 10.2 or later TASCAM GB-10... -
Page 97: Other Specifications
160 g / 5.644 oz (not including batteries) Power Operating temperature range Two AA batteries (Alkaline or Ni-MH) 0 - 40°C/32°F - 104°F AC adaptor (TASCAM PS-P520, sold separately) USB bus power Dimensional drawings Power consumption 0.4 W (during MP3 playback) - Page 98 Notes TASCAM GB-10...
- Page 99 Notes TASCAM GB-10...
- Page 100 GB-10 TEAC CORPORATION Phone: +81-42-356-9143 www.tascam.jp 1-47 Ochiai, Tama-shi, Tokyo 206-8530 Japan TEAC AMERICA, INC. Phone: +1-323-726-0303 www.tascam.com 7733 Telegraph Road, Montebello, California 90640 USA TEAC CANADA LTD. Phone: +1905-890-8008 Facsimile: +1905-890-9888 www.tascam.com 5939 Wallace Street, Mississauga, Ontario L4Z 1Z8, Canada TEAC MEXICO, S.A.