Table of Contents
Advertisement
12 − Other settings
Restoring the factory settings
You can restore the menus and other settings to their facto-
ry-set state. You cannot restore these settings if media is
inserted in the current device.
Remove the media before you perform the following menu
operation. (For details on operations in the menu screen,
refer to "Operations in the menu screen" on page 18)
1 Press the
key to access the main menu list
MENU
screen.
2 Select the UTILITY menu.
3 Select the FACTORY PRESET item.
A confirmation popup will appear.
Formatting a CompactFlash card
If CF is selected as the current device, and playback/
recording is stopped, you can format the entire CF card in
FAT format.
Before you use a CF card used by another device with the
SS-CDR1, you must format it.
NOTE
When you format a card, all folders and files stored
on that card will be deleted.
Perform the following menu operations. (For details on
menu operations, refer to "Operations in the menu screens"
on page 18.)
1 Press the
key to access the main menu list
MENU
screen.
2 Select the UTILITY menu.
3 Select the MEMORY FORMAT item.
A confirmation popup will appear.
74
TASCAM SS-CDR1
NOTE
If you select the FACTORY PRESET item when a
CompactFlash card is inserted, a popup of
will appear, and your selection will not be
SELECT
accepted. Remove the card and perform the operation
once again.
4 Once again press the front panel
(or the remote's
ENTER
The settings will be reset.
5 Press the
key (or the remote's
TIME (ESC)
key) to return to the home screen.
CLR/ESC
4 Once again press the front panel
(or the remote's
ENTER
The card will be formatted.
During execution, the display will indicate
5 Press the
key (or the remote's
TIME (ESC)
key) to return to the home screen.
ESC
,
CAN
T
dial
MULTI JOG
key).
dial
MULTI JOG
key).
.
F ormat
CLR/
Advertisement
Table of Contents
