Rear Panel - Tascam Professional CD-RW900 Owner's Manual

Use this key to operate cue playback
˚/¥key
i
(search) while in playback or ready modes.
When Directoy search is on, and when stopped,
using this key selects the directory.
It also moves the cursor in the right direction
when entering TEXT data.
Use this key to stop playback or re-
STOP key
o
cording.
Use this key to start or resume play-
PLAY key
p
back or recording.
Use this key to standby for playback
READY key
a
or recording.
Use this key to enter record ready
RECORD key
s
mode (see "Basic recording" on page 23 for de-
tails) and also to enter manual track divisions (see
"Manually divide track" on page 26).

Rear panel

h j k
ANALOG INPUT (L, R)
h
analog audio signals from suitably-equipped
units (−10 dBV, unbalanced).
ANALOG OUT (L, R)
j
analog audio signals (at −10 dBV levels, unbal-
anced) to suitably-equipped units).
DIGITAL COAXIAL (IN, OUT)
k
jacks accept and output digital audio in standard
consumer format (SPDIF).
2 − Features of the CD-RW900
l
These RCA jacks accept
These RCA jacks output
These two RCA
1-Introduction
Use this key to turn synchro-
SYNC REC key
d
nized recording on and off before starting to re-
cord (see "Synchronized recording" on page 24
for details).
Use this key to select the differ-
INPUT SELECT
f
ent audio inputs and the input combinations (see
"Input selection" on page 22 for full details).
An IBM PC-compatible key-
KEYBOARD jack
g
board with PS/2 interface can be connected to
this terminal to enable certain operations of the
CD-RW900 with the keyboard. Title input opera-
tions, in particular, can be performed with greater
efficiency.
DIGITAL OPTICAL (IN, OUT)
l
TOSLINK optical connectors accept and output
digital audio using optical fiber connectors.
Connects the power cable supplied.
AC IN jack
;
;
These two
11
TASCAM CD-RW900