Table of Contents
Advertisement
Chapter 15 Ring Group
Table 65 Configuration > PBX > Extension Management > Ring Group > Advanced
LABEL
Description
Add, Edit, Delete
15.2.4 The Add/Edit Page Group Screen
The screens for editing or adding page groups on the X2002 contain the same fields. Only the
screen used to add page groups is shown below. To display, click the Add (or Edit) icon in the
Paging section of the Ring Group configuration screen.
Figure 178 Add/Edit Page Group
The following table describes the labels in this screen.
Table 66 Add/Edit Page Group
LABEL
Entry Number
Pincode
Max Paging Time
Description
Extensions
Apply
Cancel
198
DESCRIPTION
This field displays the description for this hunt group.
Click:
•
Add - to create a new hunt group.
•
Edit - to configure the settings of a hunt group.
•
Delete - remove an existing hunt group.
DESCRIPTION
Type the number you have to dial to call the extensions in this page group. This
number can be from 3 to 10 digits long.
Type the password you have to dial to call the extensions in this page group. This
number can be from 4 to 8 digits long. If you leave this field blank then callers do
not have to dial a Pincode to call the extensions in this page group.
Type the maximum number of seconds that a person can page a group of
extensions.
Type a description for this page group.
Move the extensions you want to be in this page group to the Selected Member
column by highlighting them in the Peer Pool column and clicking the Right icon.
Remove the extensions you don't want to be in this page group from the Selected
Member column by highlighting them and clicking the Left icon.
Click this to save your changes.
Click this to go back to the previous screen without saving your changes.
X2002 User's Guide
Advertisement
Table of Contents
