▶ If necessary, disconnect cables from the other components.
▶ Carefully pull out the corresponding riser module upward.
The riser module is installed under the riser module 6/7. You can only
remove the riser module after the riser module 6/7 was removed.
4.8.5
Installing the riser module
The riser module must be installed under the riser module 6/7. You must
install the riser module before you install the riser module 6/7.
Figure 18: Installing the riser module
▶ Install the riser module into the system board slot and press down the green
touch points.
RX4770 M5
Upgrade and Maintenance Manual
Basic hardware procedures
65