Table of Contents
Advertisement
Figure 200: Installing the top system board locking device
▶ Turn the top system board upside down and push the locking device
between the four connectors (see arrow).
▶ Fasten the three screws and turn the top system board back to the top.
▶ Install the heat sink with the CPU on the new top system board, see
"Installing the CPU and heat sink" on page
Concluding steps
▶
"Installing the top system board holder" on page
▶ Install all memory modules, see
Ensure that you install each memory module again in the slot it was
located before the replacement.
▶ Install all riser modules, see
page
62.
▶
"Installing the fan cage" on page
RX4770 M5
"Installing memory modules" on page
"Installing the riser module 3/4 and 6/7" on
71.
Upgrade and Maintenance Manual
System board and components
287.
79.
257.
357
Advertisement
Table of Contents
