Figure 99: Installing the SAS CP500i RAID controller
▶ Connect the HDD LED cable to the connector "HDD LED" on the system
board as shown (see close-up)
For the cable plan, see
Concluding steps
▶ For slot 3, 4, 5, 6 and 7: Install the corresponding riser module, see
"Handling riser modules" on page
▶
"Reassembling" on page
▶
"Connecting the power cord (AC PSU)" on page
▶
"Switching on the server" on page
▶
"Switching on the server" on page
▶
"Enabling Option ROM scan" on page
▶
"Resuming BitLocker functionality" on page
RX4770 M5
Expansion cards and backup units
"Appendix B" on page
60.
53.
59.
59.
94.
Upgrade and Maintenance Manual
435.
58.
108.
199