Table of Contents
Advertisement
▶
"Removing the top system board holder" on page
For M.2 SSD with 42 and 80 mm
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page
▶
"Removing the riser module 3/4 and 6/7" on page 61
▶ If an expansion card is installed in slot 5, see
on page
64.
Installing the M.2 SSD
CAUTION
An M.2 SSD in M.2 slot 2 is not recognized, if M.2 slot 1 is free.
▶
The M.2 slot 1 must be equipped first.
Each M.2 SSD needs one hexagon stand-off for fastening. To support
different length of M.2 SSD, several nuts are on the system board
indicating the positions for fastening the M.2 SSD.
If no M.2 SSD has been installed before:
▶ Remove the screw (see orange circles in
If the hexagon stand-off is unscrewed as well, remove the screw from
the hexagon stand-off.
▶ Install the hexagon stand-off on the right position depending on the length of
the M.2 SSD.
RX4770 M5
45.
Upgrade and Maintenance Manual
System board and components
74.
46.
47.
"Removing the riser module"
Figure
187).
335
Advertisement
Table of Contents
