Fujitsu PRIMERGY RX4770 M5 Upgrade And Maintenance Manual page 308

Front panel
▶ Connect the front panel cable (1) and the front USB cable (2) to the bottom
system board.
▶ Connect the front VGA cable (3) to the bottom system board, see
Figure 172.
▶ Connect the two mini-SAS cables to the bottom system board (see orange
circles in Figure
The front panel cable must run under the mini-SAS cables at the
HDD backplane.
Figure 173: Routing front panel cable and USB3.0 cable
Concluding steps
▶ Connect all cables to the HDD backplane, see
HDD backplane" on page
▶ If applicable, install the RAID controller in PCIe slot 8, see
expansion card" on page
▶
"Installing the top system board holder" on page
▶
"Installing the fan cage" on page
308
172).
154.
190.
71.
Upgrade and Maintenance Manual
"Replacing the 16x 2.5-inch
"Installing an
79.
RX4770 M5