Table of Contents
Advertisement
Expansion cards and backup units
Installing the new OCP module
▶ Install the OCP module, see
Concluding steps
▶ Install the riser module 3/4, see
page
62.
▶
"Reassembling" on page
▶
"Connecting the power cord (AC PSU)" on page
▶
"Switching on the server" on page
▶ If replacing an OCP module with an OCP module with different number of
ports (e.g. 2-port to 4-port):
▶ Configure the additional MAC addresses in the OS, if you have no VIOM
(ServerView Virtual-IO Manager) installed. If you have VIOM installed, it
is not necessary to configure the MAC address. This is virtualized by
VIOM.
▶ Inform the customer about these MAC addresses, see
information" on page
▶ If replacing the system board (except OCP module PLAN EP 2x 25G/10G):
▶ Inform the customer about these MAC addresses, see
information" on page
▶
"Updating the NIC configuration file in a Linux and VMware environment" on
page
107.
▶
"Configuring LAN teaming" on page
9.6
Installing SFP+ transceiver modules to
OCP modules (optional)
Upgrade and Repair Unit
(URU)
188
"Installing the OCP module" on page
"Installing the riser module 3/4 and 6/7" on
53.
59.
110.
110.
116.
Upgrade and Maintenance Manual
58.
"Basic
"Basic
Hardware: 5 minutes
184.
RX4770 M5
Advertisement
Table of Contents
