Replacing The Controller - Pentair FLECK 5810 XTR Installer Manual

Installer Manual Fleck 5810 - XTR - Maintenance
9.2.2. Controller replacement
No.
A Press the cover clips (2) on each side and open the cover (1).
B Press the board clips (3) and release the controller (4).
C Disconnect the old controller.
D Connect the new controller, see 5.8. Electrical connections, page 47.
E Reverse above procedure steps to rebuild.
98 / 124
Operation
Ref. MKT-IM-018 / C - 08.06.2018