Master Setting Screens - Pentair FLECK 5810 XTR Installer Manual

Installer Manual Fleck 5810 - XTR - Programming
Note
If immediate volumetric regeneration has been set, regeneration time will have no influence
on it and regeneration will start as soon as capacity end.
Note
Changing the hardness setting recalculates treatment volume and regeneration interval.
This setting should only be changed on the advice of a professional.
Note
The hardness parameter is not accessible in timeclock and filter mode.
Press to save your changes or press
Note
Additional features may be accessed from the Settings screen by pressing the buttons at the
bottom of the screen:
Master settings:
Brightness:

6.2.8. Master setting screens

The master settings screens include all configurable parameters available in the controller.
From the settings screen, press the settings button
Press to continue to the password screen or press
60 / 124
to return to the home screen without saving.
Displays the master settings screen, which allows you to fully
program the valve.
Displays the brightness screen, which allows you to adjust the
backlight brightness of the controller screen.
Master Settings
before entering
master programming
please contact your local
water professional
. A warning message appears:
to return to the home screen.
Ref. MKT-IM-018 / C - 08.06.2018