Volume Since Last Regeneration (Vu); Reserve Capacity (Rc); Software Version (Sv); Resetting The Controller - Pentair FLECK 9000 SXT Installer Manual

6.6.5. Volume since last regeneration (VU)

Note
Shows the volume used since the last regeneration (L).
D Volume since last regeneration display (L or Gal depending on display
format programmed):

6.6.6. Reserve capacity (RC)

Note
Shows the remaining reserve volume until next regeneration (L).
E Volume until next regeneration display (L or Gal depending on display
format programmed):

6.6.7. Software version (SV)

Note
Shows the version of the software used by the controller.
F Software version display:
6.7.

Resetting the controller

Note
There are two methods to reset.

6.7.1. Soft reset (SR)

Caution
All the parameters are set to default values, except volume remaining in volumetric
systems and days since last regeneration in time clock systems.
A Press and hold
until SR is displayed.
Ref. MKT-IM-020 / B - 08.06.2018
and for 25 seconds while in normal service mode
Installer Manual Fleck 9000 - SXT - Programming
59 / 108