Pentair FLECK 5810 XTR Installer Manual page 64

Installer Manual Fleck 5810 - XTR - Programming
Screen name Parameters
Language
Format,
Format
Units
Hardness
units
Format,
Free-form
Assistance
text
name
Format,
Free-form
Assistance
text
phone
Format,
Assistance Interval
interval
System
Valve
Valve
Regen type
64 / 124
Values
English
French
German
Italian
Spanish
Dutch
Portuguese
U.S.
Metric
Grain per gallon
mg/L or ppm
German degrees
French degrees
Clark degrees
A - Z and space
0 - 9 and space
Month based: 1 - 60
Regen based: 5 - 2000
OFF
4
5800
5810
5812
Time clock
Softener immediate
Softener delayed
Filter immediate
Filter delayed
Notes
Changes the language to display screen text
and button labels.
Changes system units and values across all
parameters in the control.
All programmed units and values are
recalculated after adjusting this setting.
Changes hardness units used in displaying
hardness parameters and calculating system
capacity and editing exchange capacity and
hardness settings.
Name of service provider to display when
viewing the assistance screen. 24 character
limit.
Phone number of service provider to display
when viewing the assistance screen. 
14 character limit.
Set to automatically display the assistance
screen after a certain number of months or
regenerations.
Type 4 (single system) is currently the only
available selection.
Select the type of valve to be installed.
Regeneration types are described in detail on
page 63.
Additional Valve screen parameters are
dependent upon selected regeneration type.
Not all parameters will be displayed.
Softener delayed regeneration type has four
reserve options (fixed %, fixed volume,
variable reserve, weekly reserve). The control
will display additional configuration options
depending on the selected reserve type.
Ref. MKT-IM-018 / C - 08.06.2018