Replacing The Controller Motor - Pentair FLECK 5810 XTR Installer Manual

9.2.6. Controller motor replacement
No.
A Remove the controller, see 9.2.2. Controller replacement, page 98.
B Disconnect the optical sensor (3).
C Open the motor clips (1) and pull out the old motor (2).
D Change the motor (2).
E Reverse above procedure steps to rebuild.
Ref. MKT-IM-018 / C - 08.06.2018
Installer Manual Fleck 5810 - XTR - Maintenance
Operation
105 / 124