Table of Contents
Advertisement
Installer Manual Fleck 5810 - XTR - Programming
6.3.2. Format screen
From the master settings screen press the format button to display the format screen.
language: Displays the language used on the controller: English, French, German, Italian, Spanish,
Dutch or Portuguese.
units: Contains settings for the unit type (either US or Metric) to be used in the controller.
hardness units: Contains settings for hardness units of measure (grains per gallon, mg/L or ppm,
German degrees, French degrees, or Clark degrees).
Note
Hardness units are adjustable only if metric units are selected.
Note
Degree hardness units are converted to ppm upon input. Degree inputs may be rounded up
or down to the nearest ppm equivalent.
Press the screen navigation arrows at the upper-right and left of the screen to navigate to the
assistance name, assistance phone, and assistance interval screens. See 6.2. Touchscreen controller
quick start, page 55 for more information about these settings.
Press
to save changes or press
68 / 124
Format
language
units
hardness units
to return to the master setting screen without saving.
english
metric
mg/L
Ref. MKT-IM-018 / C - 08.06.2018
Advertisement
Table of Contents
