Pentair FLECK 5810 XTR Installer Manual page 89

Note
If a regeneration is scheduled to occur while in the Diagnostic screen, the scheduled
regeneration will start as soon as exit the diagnostic.
Note
Only Peak Flow and Totalizer can be changed, they can be reset to zero by entering the
parameter and then pressing
Note
Totalizer has a maximum value of 99 999 999. If this number is reached, the totalizer must
be reset to zero to continue tracking this value.
Parameter
Flow rate Displays the current flow rate.
Displays maximum flow rate of water since last reset. By entering the
Peak flow
parameter, date and time of occurrence will be displayed.
Totalizer Displays total volume of water used since last reset.
Last Regen Displays time occurred after last regeneration.
Displays the reserve volume based on the reserve type selected under master
Reserve
settings.
Note
This parameter is only available for softener meter delayed regeneration type.
Software Version Displays the software version installed on the controller.
Displays how many manually and system initiated regenerations the system
No. of Regens
has gone through since last reset.
Displays the average length of time between regenerations based on the past
Regen. Interval
four regenerations.
Displays average water usage for each day of the week based on the usage on
that day for the past six weeks. Enter the parameter to display average water
daily usage. Select each day to display daily consumption for each day of the
Daily Usage
past six weeks together with dates. Use the arrows
diagnostics screen.
Usage Since
Displays water usage since last regeneration.
Regen.
Last Settings
Displays the time occurred after the last update to master settings.
Change
Seal Life Not available.
Ref. MKT-IM-018 / C - 08.06.2018
Installer Manual Fleck 5810 - XTR - Programming
.
Description
and to come back to
89 / 124