Table of Contents
Advertisement
Installer Manual Fleck 5810 - XTR - Programming
6.3.8. Settings review
From the master settings screen press the settings review button to display the settings review
screen, which display a read-only summary of all programmed settings in the controller.
Format
language
english
units
metric
hardness units
mg/L
Use the navigation arrows at the top of the screen to scroll through the parameters currently set in
the controller. The settings review screens are formatted similarly to the corresponding screen
where each parameter was set.
Press
to return to master settings.
6.3.9. Remote Regeneration screen
From the secondary master settings screen press the remote regen button to display the remote
regeneration screen.
Remote Regeneration
remote signal
off
duration
remote signal duration: Contains settings for triggering a regeneration via a remote input. Set a
timing in seconds for contact closure in order to trigger the regeneration.
86 / 124
Ref. MKT-IM-018 / C - 08.06.2018
Advertisement
Table of Contents
