Pentair FLECK 5810 XTR Installer Manual page 84

Installer Manual Fleck 5810 - XTR - Programming
6.3.6.3 Time Based
start time #: Time the relay will turn ON from the start of a regeneration cycle.
end time #: Time the relay will turn OFF from the start of a regeneration cycle.
Press to save and to pass to the second time settings screen or to the master settings screen.
Press to return to the master settings screen without saving.
Set the second times and press
or press to return to the master settings screen without saving.
If already in second relay, or if second relay has not been activated, press
the master settings screen or press
6.3.6.4 Volume Based
84 / 124
Aux. #: Time Based
start time 1
end time 1
to save and to pass to the second relay settings screen if present,
to return to the master settings screen without saving.
Aux. #: Volume Based
volume
duration
1 m
5 m
to save and to return to
550
L
15 s
Ref. MKT-IM-018 / C - 08.06.2018