Time Settings - Pentair Onga FREEFLO Owner's Manual

TIME SETTINGS

TIME SETTINGS
Setting the Analogue Clock
To set the time, turn the minute hand clockwise until the time of day is set on the Inner Dial. For
To set the time, turn the minute hand clockwise until the time of day is set on the Inner Dial. For
example, to adjust the time to 8:00pm, adjust the Timer as per Fig 8. The Outer Dial has 24-hour
example, to adjust the time to 8:00pm, adjust the Timer as per Fig 3. The Outer Dial has 24-hour
markings with 15-minute increments to match the Inner Dial time at the Activation Point.
markings with 15-minute increments to match the Inner Dial time at the Activation Point.
It is important to ensure that if the time is set to 8.00pm, the Activation Point on the Outer Dial
It is important to ensure that if the time is set to 8.00pm, the Activation Point on the Outer Dial
will align with 20, not 8, which would be 8.00am.
will align with 20, not 8, which would be 8.00am.
Program the Timer by pushing the captive trippers to the outer position for the entire period that
Program the Timer by pushing the captive trippers to the outer position for the entire period that
the chlorinator and pump are to be turned "ON". Each tripper corresponds to 15 minutes on the
the chlorinator and pump are to be turned "ON". Each tripper corresponds to 15 minutes on the
24-hour dial. When the tripper is pushed inwards, the Timer is in the "OFF" position.
24-hour dial. When the tripper is pushed inwards, the Timer is in the "OFF" position.
Minute Hand
One tripper equates
to 15 minutes
6. Circuit Breaker: A circuit breaker is mounted on the front of the Pentair Onga FREEFLO
Chlorinator and is designed to activate in the event of power surge or overload. When activated
the yellow centre button will pop out turning off the unit. To reset, press the yellow centre button
back in to resume normal function. Important note, turn off the chlorinator at the power point
before attempting to reset the circuit breaker. Should the circuit breaker continually activate
then you should contact your local Pentair distributor.
7. Timer/Off /Manual Switch: This switch allows you to choose the timer operation mode for
your chlorinator and pool pump. Switched to the left position, Timer, allows the chlorinator and
pool pump to turn off and on at your designated timer settings. The Manual selection, switched
to the right, allows the chlorinator and pump to work continuously until you physically change the
chlorinator' s mode. The Off position in the middle will turn the power off to the chlorinator and
circulation pump.
8 FREEFLO Salt Chlorinator Owner' s Manual
Fig.3
Fig.8
Activation Point
Inner Dial
Outer Dial