Step 5: Recording A Song On An Md Or Dat Recorder - Roland U-8CW Getting Started Manual

Creating Songs with the U-8 and Cakewalk

Step 5: Recording a Song on an MD or DAT Recorder

You can record a mastered song on an MD or DAT recorder connected to the
U-8's Line Output jacks or Digital Output connector.
1
Connect the recording device you're using (MD recorder, DAT recorder, or
the like).
fig.10-70.e
U-8
ON
OFF
OUT
AC IN POWER USB
DIGITAL OUTPUT
Optical digital cable
U-8 Audio cable
L L
INPUT
R R
MIC A B
OUTPUT AUX IN
2
On the U-8, press the
sequencer to rewind.
3
Operate the recording device to start recording. When recording starts,
press the
sequencer to play back the data.
4
When the song ends, stop recording on the recording device, then press the
Stop button to stop playback, or use the sequencer to stop playback.
52
FOOT SW OUTPUT INPUT
IN
MIDI DIGITAL
DIGITAL INPUT
INPUT
GUITAR (Hi-Z)
To Start of Song Button to rewind, or use the
Play button to start playback of the song, or use the
Portable MiniDisc Recoeder, DAT etc.
Cables for digital output or
line output are not
included. You'll need to
provide cables that match
the type of input
connectors on the MD
recorder, DAT recorder, or
other equipment you're
using.