Roland U-8CW Getting Started Manual page 45

4
At the EZ RECORDING - Track Selection, select the audio track you wish
to record.
fig.10-30f.e.eps_50
5
At the EZ RECORDING Wizard - Input Volume Setting, use the Input B
Sensitivity Volume knob to adjust the input level. After adjusting the
level, press the
fig.10-30c.e.eps_50
6
At the EZ RECORDING Wizard - Effect Selection, (1) press the U-8's
SELECT button to select whether to apply effects, then (2) press the
CURSOR buttons or turn the
ENTER
and press the
the selection, press the
In this example, (1) select Apply Insertion Effect, then (2) select the Mild
Lead patch from Guitar Hard.
NEXT button or click Next.
VALUE
TIME/VALUE dial to move the cursor,
ENTER button to select the effect patch. After making
NEXT button or click Next.
Creating Songs with the U-8 and Cakewalk
SELECT
For information on how to
adjust the Input B
Sensitivity Volume knob,
see the explanation on p. 56.
45