Roland U-8CW Getting Started Manual page 39

fig.1-30
The dialog closes, and the demo song you selected is loaded into the
application.
Listening to the Demo Song
After the demo song has loaded, follow the steps below to play it back.
* The MIDI parts of the demo song use sounds from the 88Pro Map. To play back
the data correctly, use the included VSC 3.0 software, or a sound module that
supports the 88Pro Map, such as the SC-88Pro, SC-8850, or SC-8820.
1
Make sure the Track Group Indicators are positioned as shown below. If
not, press the Track Group Select button to position them.
fig.05-12b
AUDIO + MIDI
1 - 8
AUDIO
1 - 8
MIDI
9 - 16
MIDI
2
Set the Track Volume Faders as shown below, and lower the Master
Volume Fader to the bottom. If you are listening through headphones,
raise the Headphones Volume to an appropriate level. If you connect the
U-8's output to a stereo system or the like, raise its volume to an
appropriate level.
fig.05-12
1
1
/ 9
3
Press the Play Button on the U-8 console, and playback begins.
Raise the Master Volume Fader gradually to the level shown below. If the
volume is too loud or too low, adjust the Headphones Volume or the
volume of the stereo system or the like that is connected to the U-8.
TRACK STATUS REC
MONITOR
AUDIO MIDI
2 3 4 RHYTHM BASS ACC 1 ACC 2
MASTER
2 3 4 5 6 7 8
/10 /11 /12 /13 /14 /15 /16
Getting Ready to Use the U-8
39